Introduction
Your electric bike is only as good as the charger keeping it powered. Whether you're commuting across Sydney, cruising bike paths in Melbourne, or tackling weekend trails, having the right eBike charger is critical to battery longevity, rider safety, and daily reliability.
At Office Catch, we stock a curated range of eBike chargers compatible with the most common lithium-ion battery voltages used in Australia — from 36V city bikes to 60V high-performance electric scooters.
This guide walks you through everything you need to know before buying.
Why the Right eBike Charger Matters
Using the wrong charger is one of the most common — and costly — mistakes eBike owners make. The risks include:
- Overcharging that degrades battery cells prematurely
- Under-voltage that leaves batteries chronically undercharged
- Connector mismatch causing damage to your battery's charging port
- Fire and safety hazards from non-approved chargers
All chargers in our eBike Chargers collection meet Australian Standard approval, giving you peace of mind with every charge.
Understanding eBike Battery Voltages
The most important spec when selecting an eBike charger is output voltage. Your charger's output voltage must match your battery's nominal voltage — not exceed it. Here's a quick reference:
| Battery Voltage | Charger Output Voltage | Common Use Case |
|---|---|---|
| 36V | 42V | City bikes, commuter eBikes |
| 48V | 54.6V | Mid-range eBikes, cargo bikes |
| 60V | 67.2V | Performance eBikes, electric scooters |
Pro Tip: The charger output voltage is always slightly higher than the battery's nominal voltage. A 36V battery charges to ~42V at full capacity, a 48V battery to ~54.6V, and a 60V battery to ~67.2V.
Our eBike Charger Range
36V eBike Chargers — For City & Commuter Bikes
The 36V Power Charger Adapter with 3-Pin XLR Plug is designed for electric scooters and bikes running 36V lithium-ion batteries. It delivers a 42V 2A output (100–240V input), is Australian-approved, and features a clear red/green LED indicator system.
Best for: Commuter eBikes, lightweight electric scooters, and 36V lithium battery systems.
Also available: the 42V 2A Battery Charger for Electric City Bikes & Scooters — Australian Safety Standard approved and ready for everyday use.
48V eBike Chargers — For Mid-Range & Cargo eBikes
The 54.6V 2A Charger for 48V Li-ion Batteries is purpose-built for 48V 13S lithium battery configurations. It includes 5 interchangeable connector pins (GX16 12mm, GX12 9mm, XIAOMI M365, XLR, and a universal option), making it widely compatible across brands and models.
Best for: 48V eBikes, electric cargo bikes, and personal mobility scooters.
Multi-Plug Charger — Maximum Versatility
If you own multiple devices or are unsure about your connector type, the 42V 2A 5-Plug Electric Power Adapter Charger is an excellent choice. It supports:
- 5.5mm 1-Prong DC Plug
- 8mm 3-Prong Connector
- 12mm 3-Prong Connector
- 8mm RCA Connector
- 3-Pin Male XLR Connector
Compatible with 36V, 25.2V, 25.9V, 25.6V, and 24V lithium-ion battery packs — this is the charger to grab if you want one solution for multiple bikes or devices.
60V eBike Chargers — For High-Performance Rides
The 67.2V 2A Lithium Battery Charger for 60V 16S Systems is engineered for high-voltage eBikes and electric scooters. It features:
- Built-in anti-jamming filters
- Internal fuse for overload protection
- Potentiometer for voltage fine-tuning
- Aluminium heat sink for thermal management
- 3-Pin 12mm Female AU Connector
Best for: 60V high-performance eBikes, electric scooters, and 16S lithium battery systems.
Need the Battery Too?
If you're setting up a complete power system, check out our 36V 15Ah eBike Lithium Fish Battery — compatible with 200W–500W motors, with an 800-cycle lifespan and an Australian-approved charger included.
Key Safety Features to Look For
When shopping for an eBike charger in Australia, always verify these safety features:
- ✅ Australian Standard Approval — mandatory for safe home use
- ✅ Over-voltage protection — stops charging if voltage exceeds safe threshold
- ✅ Over-current protection — prevents excess current draw
- ✅ Over-temperature protection — shuts down if the charger overheats
- ✅ Short-circuit protection — protects both charger and battery
- ✅ LED charging indicators — Red = charging, Green = fully charged
All products in our eBike Chargers collection include these safety protections as standard.
Common eBike Charger FAQs
Q: How do I know which voltage charger I need?
Check your battery label or the original charger's output voltage. Match the charger output voltage to your battery's full-charge voltage (not nominal voltage).
Q: Can I use a higher amp (A) charger to charge faster?
Yes — a higher amperage charger will charge faster, but always stay within your battery manufacturer's recommended maximum charge current to avoid degrading the cells.
Q: Are these chargers compatible with all eBike brands?
These are compatible replacement chargers, not OEM products. Always verify your battery's voltage and connector type before purchasing.
Q: What does the red/green LED mean?
Red = actively charging. Green = fully charged or charger is connected but battery is disconnected.
Q: Can I leave my eBike on charge overnight?
With a quality charger that has automatic cut-off (all of ours do), it's generally safe — but best practice is to unplug once fully charged to maximise battery lifespan.
Shop eBike Chargers at Office Catch
Browse our full range of eBike chargers — Australian-approved, lithium-ion compatible, and available for fast delivery across Australia.